HG440 Permanent Anti Slip 500ml
Product number: HG440
Low Delivery Charge
Just £3.95 per order
Was
£8.88
Now
£7.61
You save £1.27
In stock
Delivered in 1-3 Working Days
Key Information :
HG440 Permanent Anti Slip 500mlFrom Now On, You Need Never Be Afraid Of Sliping In The Bathroom, On The Steps, In The Porch Etc
For Use Both Inside And Outside
• APPLICATION:
Roughens the surface of slippery tiles and natural stone floors, as well as enamel
and ceramic shower trays and baths.
• DIRECTION FOR USE:
Preliminary treatment:
Use HG remover/ HG polish wax and dirt remover or HG marble shine finish
remover/ HG stripper for marble, to clean the surface to be treated and remove
traces of grease and old polish etc.
Rinse the surface thoroughly with water (using a floor cloth or a mop).
In the case of floors, remove excess water using a sponge or water vacuum
Cleaner. Let the surface dry naturally. Ensure that any surfaces being treated are
well screened off so that the liquid remains on these surfaces.
This can be achieved using 2 layers of masking tape, for example.
Action period : Natural stone 7 - 10 min
Ceramic tiles, shower trays and baths 7 - 15 min
Concrete 7 - 10 min
Enamel 4 - 8 min
Treatment:
Wear rubber gloves to protect your hands. Apply the (diluted) product using a
sponge (see dosage instructions) and make sure that the surface remains
moistened by the product during the action period.
Please note:
In case the shower trays and bats, ensure that the product does not drain away
down the plughole before it has taken effect.
After the action period, rinse (neutralise) the surface using HG remover/ HG
polish wax and dirt remover or HG marble shine finish remover/ HG stripper,
diluted according to the instructions on the label.
Rinse with water to remove any residue. In case of floors with an insufficient
anti-slip effect, repeat the treatment but this time use undiluted HG permanent
anti-slip
Close Window
HG440 Permanent Anti Slip 500mlFrom Now On, You Need Never Be Afraid Of Sliping In The Bathroom, On The Steps, In The Porch Etc
For Use Both Inside And Outside
• APPLICATION:
Roughens the surface of slippery tiles and natural stone floors, as well as enamel
and ceramic shower trays and baths.
• DIRECTION FOR USE:
Preliminary treatment:
Use HG remover/ HG polish wax and dirt remover or HG marble shine finish
remover/ HG stripper for marble, to clean the surface to be treated and remove
traces of grease and old polish etc.
Rinse the surface thoroughly with water (using a floor cloth or a mop).
In the case of floors, remove excess water using a sponge or water vacuum
Cleaner. Let the surface dry naturally. Ensure that any surfaces being treated are
well screened off so that the liquid remains on these surfaces.
This can be achieved using 2 layers of masking tape, for example.
Action period : Natural stone 7 - 10 min
Ceramic tiles, shower trays and baths 7 - 15 min
Concrete 7 - 10 min
Enamel 4 - 8 min
Treatment:
Wear rubber gloves to protect your hands. Apply the (diluted) product using a
sponge (see dosage instructions) and make sure that the surface remains
moistened by the product during the action period.
Please note:
In case the shower trays and bats, ensure that the product does not drain away
down the plughole before it has taken effect.
After the action period, rinse (neutralise) the surface using HG remover/ HG
polish wax and dirt remover or HG marble shine finish remover/ HG stripper,
diluted according to the instructions on the label.
Rinse with water to remove any residue. In case of floors with an insufficient
anti-slip effect, repeat the treatment but this time use undiluted HG permanent
anti-slip
Do You Know this product?
