HG186 Mould Spray 500ml
Product number: HG186
Low Delivery Charge
Just £3.95 per order
Was
£5.76
Now
£4.93
You save £0.83
In stock
Delivered in 1-3 Working Days
Key Information :
HG186 Mould Spray 500mlDestroys Mould, Algae, Fungus And Moss
Removes Black Spots
• APPLICATION
On silicone and rubber seals, plaster and tile grouts in areas of high humidity both
inside and outside.
• DIRECTIONS FOR USE
Apply HG "mould spray" directly to mould and algae but scrape away layers of
fungus and moss before use. Fix the spray attachment onto the bottle. Spray the
surface from a distance of approximately 5 cm (2 inches). Leave the product to work
for 10 minutes. Flexible silicon seals and surfaces that are badly stained should be
sprayed again after 10 minutes. When clean, rinse the treated area with plenty of
water and a sponge.
• PRODUCT INFORMATION
Characteristics : bleaching liquid
Density : 1.09 g/ml
pH : 13 13.5
Usage : 4 - 6 m2/L
Active matter : 4.5 %
Components : sodium hydroxide, sodium hypo chlorite, Mixture of lauryl
ether carboxylic acid and sodium octyl sulfate and water
• PACKAGING : 6 x 0.5 L
• PRECAUTIONS
Store upright in a cool dark place. Storage life: see base of bottle. Avoid splashes on
clothes. R36/38-Irritating to eyes and skin. S2-Keep out of reach of children.
S26- In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice. S37- Wear suitable gloves. S46- If swallowed, seek medical advice
immediately and show this container or label. S50- Do not mixing with acids.
S64-If swallowed, rinse mouth with water (only if the person is conscious). Caution!
Do not use in combination with other products, hazardous gasses (chlorine) could
be released.
Close Window
HG186 Mould Spray 500mlDestroys Mould, Algae, Fungus And Moss
Removes Black Spots
• APPLICATION
On silicone and rubber seals, plaster and tile grouts in areas of high humidity both
inside and outside.
• DIRECTIONS FOR USE
Apply HG "mould spray" directly to mould and algae but scrape away layers of
fungus and moss before use. Fix the spray attachment onto the bottle. Spray the
surface from a distance of approximately 5 cm (2 inches). Leave the product to work
for 10 minutes. Flexible silicon seals and surfaces that are badly stained should be
sprayed again after 10 minutes. When clean, rinse the treated area with plenty of
water and a sponge.
• PRODUCT INFORMATION
Characteristics : bleaching liquid
Density : 1.09 g/ml
pH : 13 13.5
Usage : 4 - 6 m2/L
Active matter : 4.5 %
Components : sodium hydroxide, sodium hypo chlorite, Mixture of lauryl
ether carboxylic acid and sodium octyl sulfate and water
• PACKAGING : 6 x 0.5 L
• PRECAUTIONS
Store upright in a cool dark place. Storage life: see base of bottle. Avoid splashes on
clothes. R36/38-Irritating to eyes and skin. S2-Keep out of reach of children.
S26- In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice. S37- Wear suitable gloves. S46- If swallowed, seek medical advice
immediately and show this container or label. S50- Do not mixing with acids.
S64-If swallowed, rinse mouth with water (only if the person is conscious). Caution!
Do not use in combination with other products, hazardous gasses (chlorine) could
be released.
Do You Know this product?
