Key Information :
Ronseal 09008 Ultra Tough Varnish Clear Gloss 250ml
Ronseal Ultra Tough Clear Varnish is an ultra-tough polyurethane varnish which provides a rich, clear, mellow finish to interior wood that is ideal for use over wood dyes. It's heat, water and scratch-resistant and therefore ideal for high-wear areas. Pack Size
250ml, 750ml, 2.5L, 5L
Colour
Clear Gloss, Matt, Clear Satin
Application
Start by ensuring all surfaces are free from wax, grease and oil, by wiping with a cloth dampened with white spirit. For bare wood, sand smooth with fine sandpaper. Do not use steel wool. Remove dust with a cloth dampened with white spirit. For previously varnished wood, first remove all unsound varnish. Sand well to a uniform appearance and clean with white spirit. Allow to dry thoroughly. Avoid inhaling dust when sanding, by wearing a suitable face mask. For best results, stir well before and during use. Apply in a warm well ventilated room. Using a brush, apply 2 or 3 coats. Brush out evenly and finish each coat in the direction of the grain. Leave 4 hours between coats. Before final coat lightly rub down using fine sandpaper and wipe with white spirit.
Drying Time
2 hours for each coat to dry and 4 hours between coats
Number of Coats
2 or 3
Suitability
Suitable for any bare or previously treated wood in the home including doors, furniture, shelving, skirting boards, cork, hardboard or chipboard.
Coverage
7.5 square metres squared
Clean up and Maintenance
Remove as much product as possible from the brush before cleaning. Clean brushes with white spirit.Do not empty into drains or watercourses. Some local authorities have special facilities for disposing of waste coatings.